Description

C7927A Installation Manual, It is necessary to configure the programmable comfort control thermostat before starting its work. This will further ensure continuous and correct operation of the C7927A Installation Manual. Study the owner's guide in English.

Honeywell C7927A Q & A

Can a Honeywell c7027a be used with a flame detector?

• Explosion Hazard and Electrical Shock Hazard. Can cause serious injury, death or property damage. The C7027A, C7035A, C7044A and C7927 Flame Detectors must be used with Honeywell flame safeguard controls (primaries, programmers, and burner management systems). Using with controls not manufactured by Honeywell could result in unsafe conditions.

Can c7027a be used on a burner?

• The C7027A, C7035A, C7044A and C7927 Flame Detectors should only be used on burners that cycle on/off or, in the absence of cycling, are periodically checked for proper operation following the application instructions provided by the equipment manufacturer.

How do you read a flame signal on a Honeywell flame safeguard?

• The flame signal will be read in microamps or voltage (Vdc) depending on the Honeywell flame safeguard combustion control used. Most existing Honeywell flame safeguard controls incorporate a flame current jack on the flame amplifier or on the control itself. The flame signal can be measured with a volt-ohmmeter such as the Honeywell W136A.

What if c7027a / c7927 overheats?

• If the temperature of the sight pipe will become high enough to cause the C7027A or C7927 to overheat (above 215°F (102°C) up to 266°F (130°C), screw a 136733 Heat Block (order separately) onto the sight pipe before mounting the detector. ADD PIPE TEE, PERFORATED NIPPLE, OR OTHER SUITABLE DEVICE FOR VENTILATION, IF REQUIRED. Fig. 6.

Honeywell Global

Honeywell International Inc. is an American publicly traded, multinational conglomerate headquartered in Charlotte, North Carolina. It primarily operates in four areas of business: aerospace, building technologies, performance materials and technologies (PMT), and safety and productivity solutions (SPS).[3] Honeywell is a Fortune 100 company, ranked 92nd in 2019.[4] The company has a global workforce of approximately 110,000 workers, with approximately 44,000 employed in the United States.[5][6] The current chairman and chief executive officer (CEO) is Darius Adamczyk.[7]

The company's current name, Honeywell International Inc., is the product of a merger of Honeywell Inc. by acquisition to AlliedSignal during 1999. The company headquarters were consolidated with AlliedSignal's headquarters in Morristown, New Jersey; however, the combined company chose the name "Honeywell" because of the considerable brand recognition.[8] Honeywell was a component of the Dow Jones Industrial Average index from 1999 to 2008. Prior to 1999, its corporate predecessors were included dating back to 1925, including early entrants in the computing and thermostat industries.[9][10] In 2020, Honeywell rejoined the Dow Jones Industrial Average index[11] and the following year moved its stock listing from the New York Stock Exchange to the Nasdaq