TP973A Installation Manual & Owner's Guide

Description

TP973A Installation Manual, It is necessary to configure the programmable comfort control thermostat before starting its work. This will further ensure continuous and correct operation of the TP973A Installation Manual. Study the owner's guide in English.

Honeywell TP973A Q & A

What kind of thermostat is a tp970?

• • All Rights Reserved SERVICE DATA TP970 and TP9600 Series Pneumatic Thermostats 75-7134-1 GENERAL The TP970 and TP9600 Series Pneumatic Thermostats are one-, two-, or three-pipe, proportioning thermostats with bimetal elements. They are suitable for controlling dampers and/or valves in HVAC systems. APPLICATION TP970A-D and TP9600A,B

What should I do if my tp973a is not calibrated?

• TP973A,B and TP9630A,B If the TP973A, B and TP9630A,B are not properly calibrated but the remainder of the system is operating properly, turn the calibration screw until the TP973A, B or TP9630A,B performs as in Step 2 under CALIBRATION CHECK. TP974A Field calibration of the TP974A is not recommended. TP978A-E

What controller is used with the tp974a?

• An RP908 or RP920 Controller is used with the TP974A to convert the output into a usable signal to operate a pneumatic valve, damper, or other equipment. TP973A OR TP9630A M N.O. HOT WATER OR STEAM SUPPLY C3543-1 TP974 VALVE TEMP GAGE 4 8 9 2 3 1 M RP920 C3544A MB Fig. 10. TP974 Typical Operation. TP978E

How does the tp971c work?

• When supply air pressure is 13 psi (90 kPa), the TP971C controls the valve and damper at the normal DAY setpoint. When supply air pressure is 18 psi (125 kPa), the TP971C closes the outdoor-air damper and switches the blower from constant to automatic operation. The TP971C then cycles the unit at reduced night setpoint.

Honeywell Global

Honeywell International Inc. is an American publicly traded, multinational conglomerate headquartered in Charlotte, North Carolina. It primarily operates in four areas of business: aerospace, building technologies, performance materials and technologies (PMT), and safety and productivity solutions (SPS).[3] Honeywell is a Fortune 100 company, ranked 92nd in 2019.[4] The company has a global workforce of approximately 110,000 workers, with approximately 44,000 employed in the United States.[5][6] The current chairman and chief executive officer (CEO) is Darius Adamczyk.[7]

The company's current name, Honeywell International Inc., is the product of a merger of Honeywell Inc. by acquisition to AlliedSignal during 1999. The company headquarters were consolidated with AlliedSignal's headquarters in Morristown, New Jersey; however, the combined company chose the name "Honeywell" because of the considerable brand recognition.[8] Honeywell was a component of the Dow Jones Industrial Average index from 1999 to 2008. Prior to 1999, its corporate predecessors were included dating back to 1925, including early entrants in the computing and thermostat industries.[9][10] In 2020, Honeywell rejoined the Dow Jones Industrial Average index[11] and the following year moved its stock listing from the New York Stock Exchange to the Nasdaq